Lenz 10231-02 Locomotive decoder Standard+ V2, 1,0A, with NEM 652 interface

For those who simply want to drive digitally, the locomotive decoder "STANDARD+" is just right. Despite its low price, we have equipped it with all the features that are considered standard for a DCC locomotive decoder nowadays - and that's why it's called that. And because it simply belongs, the new STANDARD+ V2 is not only RailCom capable, but also masters the practical ABC technology.

Thanks to intelligent operating mode selection, the STANDARD+ can also be used as a low-cost function decoder.

Now with ABC: The new locomotive decoder STANDARD + V2 The new STANDARD+ V2: it can do everything the STANDARD+ always could. Now we made it ABC-capable, gave it an additional function output and optimized it for use with LEDs. However, we have not changed the price. It remains the same as before.

Digital plus decoders of the + series are equipped with the RailCom function. With RailCom, bidirectional communication between locomotive and command station is possible: in addition to the locomotive address, other data (e.g. current speed, CV content) can be sent back from the locomotive via the track, displayed and processed by suitable software via the Railcombus message system in the PC.

The outstanding feature of all Digital plus decoders is the exclusive ABC technology, which enables simple, precise stopping before signals. With the use of the ABC brake modules, a particularly simple signal stop can be realized. In conjunction with the constant braking distance, exact stopping before red signals is no problem. Of course, passage in the opposite direction is possible.

The implementation of the signal pattern "slow speed" is possible without any problems, whereby the speed to be driven here can be set via CV in the decoder. During the signal stop or slow speed all functions can be operated, also reversing away from the red signal is possible. And: with the ABC brake modules even shuttle train traffic can be set up - with or without intermediate stop. Furthermore, with the BM3 ABC modules, a block line of any length can be set up very easily.

Highlights:

• Intelligent mode selection allows use as a function decoder more info.
• RailCom-capable, RailCom function already set at the factory
• ABC-capable for point-to-point stopping and automatic block sections
• High-frequency control of motor speed
• motor current 1 A
• four function outputs*, 150 mA loadable each (30 mA for bulbs)
• total load capacity of all F outputs: 350 mA
• function outputs time-controlled switchable (e.g. for remote-controlled clutches)
• outputs naturally short-circuit protected
• operate with 2- and 4-digit addresses
• of course also in multiple traction
• automatic recognition of digital/analog operation
• shunting mode
• connection cable with plug NEM652
• In addition to the three function outputs on the NEM652 interface, we have created the possibility for a fourth; for this, you only have to solder a cable to the free outer solder pad.

Dimensions: 25 x 15 x 3.8 mm

Scope of delivery:

• 1x locomotive decoder STANDARD+ V2

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.