Lenz 60101 SET101 Starter set with LZV 200 V4.0 and LH101 hand controller With new software version 4.0!
388.55 €
409.00 € UVP*
Not available at this time Notify me when available










Produkte einfach finanzieren
Finanzierung | Rate | eff. Zins | |
---|---|---|---|
6 Monate | = | 66.40 € | (8.90%) |
12 Monate | = | 33.92 € | (8.90%) |
24 Monate | = | 17.68 € | (8.90%) |
36 Monate | = | 12.28 € | (8.90%) |
48 Monate | = | 9.60 € | (8.90%) |

Alle Angaben von monatlichen Raten sind ohne Anzahlung. Ein Angebot der TARGO Bank. Eff. Jahreszins zur Zeit 8,9% bei einer Laufzeit von 6, 12, 24, 36 bzw. 48 Monaten. Die Mindestrate beträgt 10 €. Bonität vorausgesetzt. Keine weiteren Kosten.
The SET101 consists of the LZV200 central amplifier combination and the LH101 hand controller. You can control locomotives with digital addresses from 1 - 9999 and additionally one conventional locomotive. To control the speed, the LH101 hand controller has a finely graduated, precise rotary knob. Up to 68 functions in locomotives can be controlled - either in momentary or continuous operation. Double and multiple traction can be conveniently set up. Up to 1024 turnouts, signals and other accessories can be switched, and turnout routes can be stored in the hand controller. Settings on locomotive decoders can be made via PoM or on the programming track. The LZV200 provides a maximum current of 5A, if necessary it can be extended with further amplifiers LV103. For more information, please refer to the operating instructions.
The new LH101 hand controller with multifunction knob and these new practical features:
- Locomotive addresses 1 - 9999, additionally one conventional locomotive* controllable Attention! Important note!
- finely graduated, precise rotary knob
- normal or shunting mode
- storage of different routes in the hand controller
- selection of club mode
- adjustment of display brightness and contrast
The proven remains natural:
- 28 and 128 speed steps
- four-digit locomotive addresses possible
- up to 29 switchable functions per locomotive
- Double and multiple traction function
- optional upgrade to automatic control
- unlimited connection of additional amplifiers
- up to 31 arbitrary input devices can be connected to the XpressNet
- Programming during operation (PoM - Programming on Main)
- up to 1,024 turnouts, signals and other solenoids switchable
- feedback bus for connection of feedback devices and feedback-capable switching receivers
- provides a maximum current of 5A for the operation of your trains
With the new software version 4.0 the LZV200 becomes a "decoder programmer". At the connections of the programming track (P,Q) and with the help of the free available software "CV-Editor" it is now possible to perform firmware updates of locomotive decoders from Lenz (including the gauge 0 locomotives).
Also with the software version 4.0 the number of switchable function outputs is extended. Now a total of 69 functions can be addressed in locomotive decoders (F0 to F68). Please note: The use of 69 functions requires a hand controller LH101/LH101-R from version 2.1, alternatively the use of the PC interface of the LZV200 or an external interface.
These options are available: Club mode 1: Only the set locomotive can be controlled, the functions assigned to the function keys A, B and C can be switched, turnouts and signals can be switched. All other control options of the LH01 are locked. Club mode 2: Only the set locomotive can be controlled, the functions assigned to the function keys A, B and C can be switched. All other operating options of the LH01 are locked.
Important note for the use of analog locomotives: Conventional (analog) locomotives used on layouts controlled with Digital plus by Lenz will produce a whistling sound. This is normal, because with DCC there is permanently a fast changing voltage on the track, which is not processed by a locomotive decoder on a conventional (analog) locomotive, but is applied directly to the motor. This voltage form is not suitable for locomotives with bell armature motors, e.g. Faulhaber motors. Locomotives with these motors may only run with a locomotive receiver (decoder) on digital layouts. Without locomotive receiver these motors would be damaged or destroyed by overheating within a short time. There are a few motor designs for which the same restrictions apply as for bell armature motors. In case of doubt, please ask the manufacturer of the locomotive.
Scope of delivery:
- 1x starter set SET101
This product is manufactured by: Lenz Elektronik GmbH Modellbahnzubehör Vogelsang 14 35398 Gießen Deutschland [email protected]
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Hersteller | Lenz |
Please send me an email as soon as the item is available