Döhler & Haass PD05A-1 Nano locomotive decoder PD05A-1 for SX1,SX2 & DCC with ribbon cable

Product features and functions:

• For optional operation with digital systems according to SelecTRIX 1 and 2 or according to DCC format.
• In digital operation, the last programmed system is used (no automatic switching!)
• SelecTRIX 1 31 speed levels, 100 addresses
• SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions
• DCC Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
• Load control of the latest generation, thus particularly soft control behavior
• Different control variants for optimal adaptation to the motor
• Internal 127 speed steps
• Adjustable motor frequency (16 kHz, 32 kHz)
• Block section operation with simple diodes in digital mode
• Light outputs dimmable
• Shunting mode
• Motor, light and track connections electronically interchangeable
• All function outputs freely programmable
• temperature protection
• Reset function for DCC and SX2
• Update capability of the decoder

The update (the firmware download from the Internet is free of charge) is possible in the installed state of the decoder on the track (no opening of the vehicle is necessary) and is done either via the FCC digital center or the programmer. If no corresponding hardware is available, the company Doehler & Haass will provide a programmer on loan upon request.

The nano locomotive decoder PD05A supports braking with asymmetrical digital voltage (four diodes in series and one diode antiparallel), slow speed (with suitable brake modules) and bidirectional communication (locomotive address feedback in DCC operation, RailCom®).

The PD05A nano locomotive decoder does not support analog operation. The nano locomotive decoder PD05A does not support SX1 programming. Please set up SX1 operation with SX2 parameter programming.

Product data: Operating mode SX1, SX2, DCC Dimensions [mm]: 5.2 * 8.0 * 2.5 Total load capacity: 0,5 A Max. Motor current: 0,5 A Max. Driving voltage: 30 V LV, LR (dimmable): 150 mA each

Scope of delivery:

• 1x PD05A nano locomotive decoder for SX1,SX2 & DCC with ribbon cable.