ESU 59610 LokPilot 5 DCC/MM/SX/M4, 8-pin NEM652, retail, H0 gauge
38.15 €
42.40 € UVP*
LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all issues in H0 and 0 gauge locomotives.
LokPilot 5 decoders are offered with all common interfaces.
Operating modes The LokPilot 5 is a true multi-protocol decoder. It masters the DCC data format as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2- and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders register fully automatically with a suitable digital command station.
It masters all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with suitable command stations. For command stations that can only program the CVs from 1-255 there are auxiliary registers.
Motorola® users benefit from up to 28 speed steps at 255 addresses. Three additional Motorola® addresses allow the triggering of 16 functions. A built-in programming mode makes reprogramming possible even with the venerable Control Unit 6021.
The M4 protocol allows automatic registration with mfx® compatible command stations. All 32 possible function keys are offered here.
The LokPilot 5 decoder recognizes Märklin® braking sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An ABC shuttle train automatic allows automatic shuttling between two stations.
The LokPilot 5 decoder can be used on analog DC and AC railroads.
The decoder switches between the operating modes fully automatically "on-the-fly". For the most part, nothing needs to be set.
Functions We know you want your locomotives to be as realistic as possible. That's why we packed the LokPilot 5 with function outputs. Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each. The versions with PluX22 or 21MTC interface add 4 outputs for controlling servos or logic level outputs. All important light functions are available. The brightness of each output can be adjusted separately. The decoder masters automatic pressing on and off during uncoupling for ROCO®, Krois® and Telex® couplers.
Motor control The motor control of LokPilot 5 has again been fundamentally improved. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell armature motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows automatic tuning of the decoder to the motor. With up to 1.5A motor current, the LokPilot 5 decoder provides enough juice even for older motors.
Operational safety If desired, a PowerPack can be connected to the LokPilot 5 for bridging dirty track sections.
Protection Of course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.
Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.
Hersteller | ESU |
Spur | H0 |
Customers who bought this item also bought
High performance motor retrofit set H0
Cable set with 8-pin socket according to NEM 652, DCC Cable colors
Spare grinder H0
Adhesive tires (10 pieces) H0
Electric turnout mechanism for C-track H0
Turnout left radius 2=437,5 mm 24,3° gauge H0 C-track
Curved track radius 2=437.5 mm 24.3° H0 gauge C track
LokProgrammer set with 240V power supply unit, PC cable and software
High performance motor retrofit set H0