LUX 8830 Track vacuum cleaner car with SSF-09 electronics, AC, H0

Track vacuum cleaner car with SSF-09 control electronics (automatic start / stop function) and Faulhaber¹ motor.

With the track vacuum cleaner trolley you can remove ...

• Dust and dirt particles from the circulating air and terrain construction

... and thus achieve:

• functional safety of the model railway vehicles
• safe current collection from rail and center conductor
• trouble-free operation

The mobile and fully functional Lux track vacuum cleaner trolley for all H0 track and control systems was specially created for the removal of loose dust and dirt particles in the entire track area. Experience has shown that it is precisely these dirt deposits from the circulating air and off-road construction that impair the safe functioning of precision mechanical components (gears, coupling rods, axle bearings, current contacts, etc.). Even the finest dirt deposits on the rail head can lead to considerable operational malfunctions.

The innovative and reliable cleaning technology of the Lux track vacuum cleaner car is built into a rail vehicle, so that even particularly inaccessible areas of your model railroad layout, such as tunnel sections, staging yards and catenary-covered track systems, etc., can be cleaned without any problems. The maintenance-free operating times of the rail vehicles can thus be significantly increased.

The track vacuum cleaner trolley is supplied with power via the traction voltage and can be pulled or pushed by standard traction units. It has no drive for locomotion.

The car is equipped with close-coupling kinematics, NEM coupler pocket. Power is supplied via the 4th point wheel contact set or the ski slider on the bogie of the car. The cleaning equipment is driven by a long-life and maintenance-free bell-shaped armature motor (Faulhaber).

The innovative SSF-09 control electronics (automatic start/stop function) operates in a motion-oriented manner. When the car is moved on the energized track (pulled or pushed by a locomotive), the cleaning technology switches on automatically. If the moving, activated cleaning trolley comes to a stop (e.g. signal stop), the cleaning technology switches off automatically. The cleaning trolley can be used on analog and digitally controlled systems.

The suction brush is interchangeably fixed to the chassis floor. This ensures optimum action of the brush at threshold height. It removes the fine particles from the sleeper grating and the rail. The dirt particles are fed to a collection container via the suction nozzle. The air drawn in escapes via a microfilter in the cover of the dust container. cover of the dust container.

Technical data: The vehicle was designed in compliance with the standards of European model railroads and is protected by patent. The H0 track vacuum cleaner car can be used with commercially available half-wave and pulse width controls.

Power supply 0-24 Volt AC/DC current consumption approx. 200 mA max. motor voltage 5 Volt DC Coupler receptacle according to NEM 362 Weight approx. 140 gram Height over rails upper edge 54 mm Length over buffers 185 mm Width 39 mm Vehicles for 2L = direct current (DC) can also be equipped with RP25 wheelsets on request.

Scope of delivery: 1 track vacuum cleaner car

Warnhinweis!
ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen.